![]() ![]() ![]() #Winbox backup configuration manual#This manual introduces you with commands which are used to perform the following functions: 7.1 Configuration parts to watch out for in exported.Set authentication-types=wpa2-psk group-key-update=1h \ Set band=2ghz-g/n disabled=no distance=indoors \įrequency=auto mode=ap-bridge ssid=MSMSLimited wireless-protocol=802.11 \ While resolving ip-address:could not get answer from dns HOME] > export I did this, when done, I tried pinging from the terminal, I got invalid value of mac-address, mac-address required blah blah Drops everything you don't need.Īdd chain=input action=accept connection-state=established,related comment="Accept established related"Īdd chain=input action=accept in-interface=bridge-LAN comment="Allow LAN access to router and Internet"Īdd chain=input action=drop comment="Drop all other input"Īdd chain=forward action=accept connection-state=established,related comment="Accept established related"Īdd chain=forward action=accept connection-state=new in-interface=bridge-LAN comment="Allow LAN access to router and Internet"Īdd chain=forward action=accept connection-nat-state=dstnat comment="Allow Port forwards"Īdd chain=forward action=drop comment="Drop all other forward"Īdd chain=srcnat action=masquerade out-interface=ether-WAN comment="Default masq" # Assign IP addresses, one for WAN and one for LANĪdd address=155.93.121.254/30 interface=ether-WAN comment="WAN Network"Īdd address=192.168.1.1/24 interface=bridge-LAN comment="LAN Subnet" Set authentication-types=wpa2-psk group-key-update=60m mode=dynamic-keys supplicant-identity=MikroTik wpa2-pre-shared-key="MYPASSWORD"Īdd address-pool=dhcp_pool0 disabled=no interface=bridge-LAN lease-time=10h name=dhcp1 Set band=2ghz-g/n disabled=no distance=indoors frequency=auto mode=ap-bridge wireless-protocol=802.11 wps-mode=disabled ssid="MSMSLimited" # Create a bridge and add ports that will be on the LAN side ![]() ![]() Set allow-remote-requests=yes servers=217.117.0.38,217.117.15.106Īdd action=accept chain=input comment="Allow access from LAN" disabled=yes \Īdd action=accept chain=input disabled=yes src-address-list=RemoteĪdd action=drop chain=forward comment="Drop invalids" connection-state=invalid \Īdd action=accept chain=forward connection-state=new disabled=yes in-interface=\Īdd action=accept chain=forward comment="Allow established connections" \Ĭonnection-state=established disabled=yes log=yesĪdd action=accept chain=forward connection-state=r Set band=2ghz-b/g/n disabled=no mode=ap-bridge ssid=MSMSLimited wireless-protocol=802.11 Wpa-pre-shared-key=xxxxxxxxx wpa2-pre-shared-key=xxxxxxx Set supplicant-identity=MikroTikĪdd authentication-types=wpa-psk,wpa2-psk eap-methods="" management-protection=\Īllowed mode=dynamic-keys supplicant-identity="" \ Set comment="Master Lan Port" name=ether2_LAN # feb/09/2018 11:03:02 by RouterOS 6.41.1Īdd comment="Bridge all ports" fast-forward=no name=bridge1 Please help, what am I doing HOME] > export compact I have tried to configure my router for internet, it shows I have internet but cannot browse the internet on it, also cannot ping the gateway. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |